GSC POWER-DIVISION MITSUBISHI EVO – 4 TO 8 STROKER GCS7008R2

$1,229.90

1 in stock

  • GSC7008R2
  • MITSUBISHI EVO 4-8
  • CAMSHAFT SET
  • STROKER

1 in stock

Frequently Bough Together

GSC Power-Division ZERO-TICK Lifters for the Mitsubishi 4G63T

EVO 1 TO 9

4G63 ENGINE DOHC

4G64 ENGINE DOHC

6G72 DOHC

AND MORE

SKU: GSC7008R2 Categories: , , Tags: , ,

Description

GSC Power-Division Billet Evolution 4-8 Stroker R2 Camshafts

he 7008R2 is a high lift, very aggressive profile, with a short overall duration to keep a lower usable RPM band. The 7008R2 is designed to rev between 4000-8500 RPMs and should be used with a stroked engine or added displacement engine. The peak lift of 12.0mm intake and exhaust will require upgraded valve springs and a titanium retainer with special attention to seal to retainer clearance. With the lift of this profile, it is suggested to only use the 5041/5040 Ti retainer and spring kits due to valve seal to retainer clearance. The 5041 can be used to 40+psi and the 5040 to 32psi on the R2 profile at 8500 RPMs without float or flutter issues. The profile will work fine on the OEM rocker arm and the zero-tick lifter, or with the OEM lifter. We have seen gains of 25-30 WHP over the S2 profile on the stroked applications, with much more possible when used with a ported head and aftermarket intake manifold.

**If using aftermarket cam gears (especially AEM) check the bolt length. Some cam gears are too thick for the OEM bolt on the billet cams, a 40mm underhead length bolt may be necessary in this case**

 

Additional information

Weight 7 kg
Dimensions 77 × 20 × 12 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Title

Go to Top