Part # GSC5040
- IN: 84 lbs @ 1.590″ / EX: 90 lbs @ 1.570″ install height
- IN: 227 lbs @ 1.149″ / EX: 233 lbs @ 1.129″
GSC Power-Division Beehive Spring Set with Titanium Retainer for all 4G63s #GSC5040
$807.60
Out of stock
Out of stock
Description
GSC Power-Division Beehive Spring Set with Titanium Retainer for all 4G63s
- IN: 84 lbs @ 1.590″ / EX: 90 lbs @ 1.570″ install height
- IN: 227 lbs @ 1.149″ / EX: 233 lbs @ 1.129″
Check your valve spring install heights here
GSC5040 Beehive Valve Spring Kit with Ti Retainers for all 4G63s Setup Coil Bind (in) Install Height (in) Seat Pressure (lbs) Open Pressure, 11.20mm Lift Maximum Valve Lift (in) Beehive 1.004 1.590 / 1.570 84 / 90 227lbs @ 1.149″
233lbs @ 1.129″0.506 - Max RPM: 8,500 RPM
- Max boost: 30 psi
The GSC Power-Division Beehive Valve Spring Kit with Ti retainer for all 4G63s includes 16 titanium retainers and 16 beehive valve springs. This set can be used for EVO 1-7 & EVO 8/9 if you are looking to replace the OEM retainers. Our beehive spring utilizes advanced material heat treatment methods for superior load loss capabilities. These springs have the highest level of spring load retention while still maintaining good fatigue throughout the life of the spring. Beehive springs allow for the use of a smaller, lighter retainer allowing for higher RPM and more valve control.
Additional information
| Weight | .4 kg |
|---|---|
| Dimensions | 26 × 16 × 6 cm |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.