GSC Power-Division Beehive Spring Set with Titanium Retainer for all 4G63s #GSC5041

$814.37

Available on back-order

Part # GSC5041

  • IN: 100 lbs @ 1.539″ / EX: 107 lbs @ 1.519″ install height
  • IN: 250 lbs @ 1.078″ / EX: 256 lbs @ 1.058″

Available on back-order

Bundle $ Save

GSC POWER-DIVISION MITSUBISHI EVO - 4 TO 8

  • GSC7008S2
  • MITSUBISHI EVO 4-8
  • CAMSHAFT SET

GSC POWER-DIVISION MITSUBISHI EVO - 4 TO 8 GCS7008S1

  • GSC7008RS1
  • MITSUBISHI EVO 4-8
  • CAMSHAFT SET

GSC Power-Division OEM Replacement Valve Keeper Set for 4G63T P# GSC1003

Part # GSC1003

  • Valve locks
  • Suit 4G63

GSC Power-Division Standard Intake Valve Guide for Mitsubishi 4G63T with stopper Part # GSC3004-1(each)

Part # GSC3004

 

  • INT GUIDE
  • MANGANESE BRONZE
  • Mitsubishi 4G63
  • STOPPER STYLE
  • QTY (1)

GSC Power-Division Standard Exhaust Valve Guide for Mitsubishi 4G63T with stopper GSC3003-1 (each)

Part # GSC3003

  • EXH GUIDES
  • MANGANESE BRONZE
  • MITSUBISHI 4G63T
  • STOPPER STYLE
  • QTY (1)

GSC Power-Division Shorty Exhaust Valve Guide for Mitsubishi 4G63T with stopper Part # GSC3005-1 (each)

Part # GSC3005

  • EXH GUIDE
  • MANGANESE BRONZE
  • Mitsubishi 4G63T
  • STOPPER STYLE
  • QTY (1)

VITON VALVE STEM SEALS KIT - MITSUBISHI EVO 1-9 / 4G63 DOHC

MITSUBISHI 4G63

  • HIGH TEMP VITON
  • 8 INTAKE
  • 8 EXHAUST

Description

GSC5041 Beehive Valve Spring with Ti Retainers for all 4G63s
Setup Coil Bind (in) Install Height (in) Seat Pressure (lbs) Open Pressure, 11.70mm Lift Maximum Valve Lift (in)
Beehive 1.004 1.539 / 1.519 100 / 107 250lbs @ 1.078″
256lbs @ 1.058″
0.476
  • Max RPM: 10,500 RPM
  • Max boost: 44 psi
  • Up to 12.1mm lift cams

The GSC Power-Division Beehive Valve Spring Kit with Ti retainer for all 4G63s includes 16 titanium retainers and 16 beehive valve springs. This kit is capable of 10,500 RPM with as much as 12.1mm lift cams (net valve lift max due to seal to bottom retainer contact). These are a must have for anyone pushing the limits. If you have had problems with valve float or throwing rocker arms, this is the spring set that will cure your problems for good. Our beehive spring utilizes advanced material heat treatment methods for superior load loss capabilities. These springs have the highest level of spring load retention while still maintaining good fatigue throughout the life of the spring. Beehive springs allow for the use of a smaller, lighter retainer allowing for higher RPM and more valve control.

Additional information

Weight .4 kg
Dimensions 26 × 16 × 6 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Go to Top